Screen Lock; Cleaning The Screen; Remove From Z-Wave Network - Honeywell RTH8580ZW User Manual

Screen lock

To prevent tampering, the screen can be partially
or fully locked.
When partially locked, the screen displays
SCREEN LOCKED
for several seconds if a locked
key is pressed. To unlock the screen, press any
unlocked key while
the screen.
When the screen is fully locked, no keys function.
To lock or unlock the screen, see function 0670
on page 20.

Cleaning the screen

SCREEN
1 Press
The screen will remain locked for 30 seconds
so you can clean the screen without changing
any settings.
2 After 30 seconds, press
normal operation, or press
you require more time for cleaning.
Note:
Do not spray any liquid directly on the
thermostat. Spray liquid onto a cloth, then use
the damp cloth to clean the screen. Use water
or household glass cleaner. Avoid abrasive
cleansers.

Remove from Z-Wave network

1 Access system setup. See "Setting functions and
options" on page 16 for information on how to
access system setup.
2 Press next to the four digit function number,
st
and scroll to function rf10.
3 Press next to the single digit option number,
t
and select option 0 to remove thermostat from the
Z-Wave network.
33-00131ES—01
SCREEN LOCKED
to lock the screen for cleaning.
DONE
to resume
SCREEN
appears on
again if
14
WED
FAN 70
Inside
AUTO
SYSTEM
HEAT
6:00
PM
SCHED HOLD CLOCK SCREEN
FAN 70
Inside
AUTO
WED
6:00
PM
SCHED HOLD CLOCK
Screen lock timer (30 seconds)
F 10
DONE
F
10
SCREEN LOCKED
70
Set To
Following
Schedule
MORE
M29357
SCREEN LOCKED
70
Set To
Following
Schedule
SCREEN USAGE
M32523
14
1
M32425