Installing And Starting The Plug-In Editor Software (Windows 95/98); Installing The Software; Starting The Dx Easy Editor - Yamaha PLG150-DX Owner's Manual

Installing and Starting the Plug-in Editor Software
(Windows 95/98)

Installing the Software

Double-click the "Setup.exe" file on the CD-ROM to start the installation. Click "Next" or "Yes" and
follow the subsequent instructions on the screen to complete the installation.

Starting the DX Easy Editor

1
Start XGworks (or XGworks lite).
2
Click the "Plug-in" menu and select "DX
Easy Editor."
Alternately, press Alt + P, then D, and ENTER. The
"Select DX Part" dialog box appears.
3
Set the desired Part number and click "OK."
The DX Easy Editor window appears.
If the PLG150-DX has been properly installed and all computer/MIDI connections have been
properly made, operating the DX Easy Editor should directly affect the PLG150-DX. For details
on using the DX Easy Editor, refer to the on-line help file that is included with the software.
20
When using a Modular Synthesis Plug-in System "mother" device, the Part assignment depends on
which mode is used — Voice or Performance — and also on whether the PLG150-DX board is
installed/assigned to PLG1 or PLG2, as described below.
When using the Voice mode:
Depending on which slot the PLG150-DX board has been installed to, press PLG1 or PLG2, then
set the Part to "1" (no matter what the PLG1 or PLG2 assignment is).
When using the Performance (Multi) mode:
If the PLG150-DX board is assigned to PLG1, set the Part to "16."
If the PLG150-DX board is assigned to PLG2, set the Part to "15."