For Modular Synthesis Plug-In System Users; Selecting Dr/Pc Voices - Yamaha PLG150-DR Owner's Manual

For Modular Synthesis Plug-in System Users

Selecting DR/PC Voices

When the PLG150-DR/PLG150-PC is installed to a synthesizer compatible with the Modular Synthe-
sis Plug-in System, the DR/PC voices can be selected in the same way as the internal voices of the
synthesizer.
• When several boards are installed to the same host device, set the "PolyExpand" parameter on the synthesizer
NOTE
• The example displays used in the following explanations are all taken from the MOTIF.
1
Enter the Voice Play mode.
Press the [VOICE] button.
2
Select a Plug-in voice.
Press any of the [PLG1] - [PLG3] buttons. The following display (or one similar) appears.
3
Select a Group.
Press any of the GROUP [A] - [H] buttons.
4
Select a Voice.
Press any of the NUMBER [1] - [16] buttons.
When using the PLG150-DR in the Song mode on the MOTIF, make sure to make these settings:
NOTE
For MOTIF6/MOTIF7/MOTIF8 users
To get the most out of your PLG150-DR/PLG150-PC, please go to the web address below and download
the latest version of the MOTIF operating system.
8
to off.
• Set the Receive Channel of the [PLG] part (the part to which the PLG150-DR has been assigned) to
Channel 10.
• On the MOTIF, set the internal part assigned to Channel 10 to off.
http://www.yamahasynth.com