For Xg Plug-In System Users - Yamaha PLG150-DR Owner's Manual

For XG Plug-in System Users

The PLG150-DR/PLG150-PC voices can be selected just like the voices of the XG tone generator.
Keep in mind, though, that they can only be selected when the Sound Module Mode is set to XG or
Performance. Also, the Part Assign parameter in the Utility mode (see below) must be set to the
desired Part.
The example displays used in the following explanations are all taken from the MU128.
NOTE
I Enabling and Selecting DR/PC Voices
1
Set the Sound Module Mode to "XG" or "PFM" (Performance).
Press the [MODE] button and use the [SELECT </>] buttons.
2
Set the Part Assign parameter to the desired Part number.
To do this:
1) Press the [UTIL] button.
2) Select the "PLUGIN" menu (with the [SELECT >] button) and press [ENTER].
3) Select the "PLG150-DR/PLG150-PC" menu if necessary (with the [SELECT </>] buttons),
4) Use the [VALUE –/+] buttons or dial to change the Part number.
The Part Assign range for the XG mode is 1 - 16 and "off"; for the Performance mode, it is 1 - 4
and "off."
Press the [EXIT] button to return to the Play mode.
10
and press [ENTER]. The Part Assign menu appears.
When several boards are installed to the same host device, assign them to the different parts.
NOTE