Yamaha PLG150-DR Owner's Manual page 63

2.2 Bulk dump
This device uses only the following bulk dump messages.
[ XG BULK DUMP ]
1) XG System bulk dump
2) Multi Part bulk dump
[ PLG150-DR/PLG150-PC NATIVE BULK DUMP ]
1. PLG150-DR/PLG150-PC NATIVE CURRENT VOICE bulk dump
2. PLG150-DR/PLG150-PC NATIVE USER VOICE bulk dump
3. PLG150-DR/PLG150-PC NATIVE MULTI PART bulk dump
2.2.1 XG bulk dump
This message sets XG-related parameters. Unlike parameter change mes-
sages, a single message can modify multiple parameters.
This message format is as follows.
F0H
11110000
43H
01000011
0NH
0000nnnn
4CH
01001100
SSH
0sssssss
0ttttttt TTH
GGH
0ggggggg
MMH
0mmmmmmm
0lllllll LLH
VVH
0vvvvvvv
: :
KKH
0kkkkkkk
F7H
11110111
Address and Byte Count are given in tables <1-n>.
Byte Count is indicated by the total size of the Data in tables <1-n>.
Bulk dump is received when the beginning of the block is specified in
"Address."
"Block" indicates the unit of the data string that is indicated in tables <1-n>
as "Total Size."
Check sum is the value that produces a lower 7 bits of 0 when this Start
Address, Byte Count, Data, and the Check sum itself are added.
2.2.1.1 XG System bulk dump
This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).
2.2.1.2 Multi Part bulk dump
This message sets the MULTI PART block (see Tables <1-1> and <1-3>).
<1 - 1>
Parameter Base Address
MODEL ID = 4C
Parameter
Address
(H) (M)
00 00
XG SYSTEM 00 00
00 00
08 00
MULTI PART : :
08 0F
70 05
PART ASSIGN
70 06
Exclusive status
YAMAHA ID
N:Device Number
Model ID
ByteCountMSB
ByteCountLSB
Address High
Address Mid
Address Low
Data
Check-sum
End of Exclusive
Description
(L)
00 System
7E XG System On
7F All Parameter Reset
00 Multi Part 1
: :
00 Multi Part 16
00 PLG150-DR Part Assign
00 PLG150-PC Part Assign
2.2.2 PLG150-DR/PLG150-PC Native Bulk Dump
This message sets the special parameters for PLG150-DR/PLG150-PC.
Unlike Parameter change, one message can modify multiple parameters.
11110000 F0H
43H
01000011
0NH
0000nnnn
01100111 67H
SSH
0sssssss
TTH
0ttttttt
GGH
0ggggggg
MMH
0mmmmmmm
LLH
0lllllll
VVH
0vvvvvvv
: :
0kkkkkkk KKH
F7H
11110111
The detail are the same as for 2.2.1 XG Bulk Dump. However, see Tables
<2-n> for the Address, Byte, Count, and block.
2.2.2.1 PLG150-DR/PLG150-PC NATIVE CURRENT VOICE bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE CURRENT
VOICE block (see Tables <2-1> and <2-2>).
2.2.2.2 PLG150-DR/PLG150-PC NATIVE USER VOICE bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE USER VOICE
block (see Tables <2-1> and <2-3>).
2.2.2.3 PLG150-DR/PLG150-PC NATIVE MULTI PART bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE MULTI PART
block (see Tables <2-1> and <2-4>).
3. Realtime Messages
3.1 Active Sensing
a) Send
This is not transmitted.
b) Receive
After FE is received one time, if the MIDI signal does not come within 300
msec, PLG150-DR/PLG150-PC will act the same as when ALL SOUND
OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS are received,
and return to the condition where has not been received once.
MIDI Data Format
Exclusive status
YAMAHA ID
N:Device Number
Model ID
ByteCountMSB
ByteCountLSB
Address High
Address Mid
Address Low
Data
Check-sum
End of Exclusive
63