Imem] Et E E E; Keycodes Andlinenumbers - HP -11C Owner's Handbook Manual

Section 5: Programming Basics 77
program memory to data storage registers in the reveirse of the
order described above.
Data Storage to Program Memory Conversion Order
S
-
R'g R.8 R<7 R'1 RO Rg R8 R1 RO
Program Memory to Data Storage Conversion Order
For additional text and illustrations describing Automatic Memory
Reallocation, refer to appendix C, How Automatic Memory
Reallocation Operates.
(MEM]
To display the current allocation of memory at any time in or out of
program mode, press (g ] , then press and hold [MEM]. While you
hold [MEM], the calculator will display (1), the number of available
program lines to fill before conversion of the next storage register
and (2), the name of the next storage register to be converted. (For a
more graphic coverage of [MEM] operation, refer to appendix C,
How Automatic Memory Reallocation Operates.
Available } {Next Register
Program Lines to Convert
p-63 r- .9
(MEM] Display With Program Memory Cleared
Keycodes and Line Numbers
When you place the calculator in Program mode and key in a
program instruction, the keycode for the keys you pressed and the
line number of the complete instruction will appear in the display.
The keycode for any program instruction will have one, two, or