Table of Contents
Advertisement
3. Disassembly and Reassemble
Description & Screws
3
Remove the screws from the BRACKET-STAND
NECK.
Screws
6003-000282
SCREW-TAPTYPE : M3xL8, ZPC(BLK)
•
75" : 4 EA
4
Locate and Remove 8 screws on the bottom side
of rear cover.
NOTE
•
Do not remove Panel/Bezel screws.
5
Insert the Open Jig tool into notch at the
bottom left side of the rear cover and following
directions 1→2→3.
3-2
Picture Description
2 Jig Direction
<directions 1 → 2 → 3>
Advertisement
Table of Contents
