Salter TERRA Owner's Manual page 6

6. ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
OWNER'S MANUAL V.012018 ENGLISH
PT-1750 TREADMILL TERRA
This manual can be downloaded from the customer area on www.salter.es
Figure 1
Figure 2
Open the carton and remove all contents.
Place the Main Frame (No. A02) on level
ground and ensure that you have a clean
work space that has adequate space.
Note: For safety reasons, do NOT cut the
Packing Belt (No. F) until you've completed
the assembly.
Lift up the Left Upright Tubes (No. A05)
upwards. See Figure 1.
Fix the Left Upright Tube (No. A05) to the
Base Frame (No. A01). Use 1 Bolt (No. D46)
and 1 Lock Washer (No. D64) to attach the
side, and 1 Bolt (No. D50) and Lock Washer
(No. D64) to attach the front. Secure using
Allen Wrench (No. B12).
Repeat the step above to assemble the Right
Upright Tube (No. A06) to the Base Frame
(No. A01). See Figure 2.
NOTE: During assembly, support the Upright
Tubes (No. A05 and A06) with your hand to
prevent them from falling down.