Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Middle Sensor Wire Ⅰ Middle Sensor Wire Ⅱ Assembly Required Tools: cross screwdriver, L-shaped cross screwdriver, open end wrench, 6mm Hex wrench (supplied as an accessory). OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 4
4. ASSEMBLY STEP 1 STEP 2 OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 5
STEP 3 STEP 4 OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 6
STEP 5 STEP 6 OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 7
When you have finished exercising, stop the treadmill by pressing the red stop button. Wait until the treadmill comes to a complete stop before attempting to get off the treadmill. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Transmitter, or wait for your own perspiration to help improve the signal. It is always recommended to use your wireless chest band when using workout programs. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 9
5."Speed" Speed window: displays Speed data. Display range:0.0-20.0km/h. 6. Lattice window: displays some auxiliary information of the treadmill. Caution: Please check and confirm the safety lock is pushed before start the treadmill. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 10
After 3 seconds, the treadmill running at a speed of 1.0 KMH. After start, press "speed +", "speed -”to adjust the speed of the treadmill, Press “incline +” and “incline -” to adjust the incline. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
This mode of running 2:30, buzzer sound 3 sounds, the motor stops running. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Which one is right for you? - HP1 (65% of MHR) is a moderate heart rate workout that targets Fat Loss. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 13
The equipment will automatically decrease the incline and / or speed until the user reaches the target pulse. HP1 Program HP2 Program HP3 Program Pulse Pulse Pulse Mini Default Mini Default Mini Default OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Press Speed+/- or Incline+/- to set the parameter of F-1---F-4 (parameter as below table); then F-5 interface will appear. Hold the hand pulse for 2-3 minutes, it will show your fitness data. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Dust and dirt may be the cause of functioning problems in the gears and the internal bearings. It is recommended keeping the equipment casing and its different elements clean. Use a cloth to clean the inside of the band. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
NOTE: Be careful not to tighten too much the belt as it may damage the equipment. To decrease tension, repeat steps 1, 2 and 3 counter clockwise. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 17
4. If the belt moves to the left, turn the right adjustment bolt in the opposite direction to the clockwise ¼ and turn the left adjustment bolt ¼ turn clockwise. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Page 18
(eg away from heat sources). To do this, use 10 ml. of specific lubricant for bands BESTRIL/243 by Salter. Before greasing, unplug the power cord. Grease the top of the board. After greasing, remove any excess of lubricant from the band and from the structure.
Sound If your treadmill has problem beyond above, please contact our customer service center at sat@salter.es. Our after-sales service team will help you. If there is any damaged part, please stop using the product immediately. Only after replacement of damaged parts or proper fixing provided by professional engineer, the ...
10. WARRANTY CONDITIONS Consult the warranty of this equipment on www.salter.es. It is essential to indicate the serial number of the equipment for repairs under warranty. OWNER’S MANUAL V072023 ENGLISH M-8370 TREADMILL FAST-70 This manual can be downloaded on www.salter.es...
Need help?
Do you have a question about the M-8370 and is the answer not in the manual?
Questions and answers