Related Manuals for Salter PT-420
Summary of Contents for Salter PT-420
- Page 1 PT-420 TREADMILL (ENGLISH) MANUAL DEL USUARIO OWNER’S MANUAL OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
-
Page 2: Safety Instructions
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... -
Page 3: Special Safety Precautions
6. Unplug before cleaning or engaging in maintenance work. 7. Make sure the striding belt is always tense. 3. CONTENT OF THE BOX: Main body Silicon bottler Display Manual Upright post Console Safety key OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... - Page 4 Hardware bag Main part Motor cover Console Motor Running belt Running deck Side rail Rear cover Incline motor Front roller Rear roller Motor belt Converter Front cover OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 5 Console Hand pulse Handlebar Safety key Upright post Motor cover Switch ON/OFF Running Belt Incline frame Side rail Rear Cover Base frame OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 6 Put the stand post into hole on the bottom frame. Connect the wire in the right stand post first, and fix the stand post with 4pcs screws (M8*15 ) each side. STEP 3 Re-assemble the motor cover by using 4 PCS M4*16 screws. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 7 Put the display onto the console with 4PCS M8*15 screws. Fasten it. STEP 6 Make sure all the screws are fastened. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
-
Page 8: Moving The Treadmill
2. Unplug from power point. Put your hands on the end of the running deck. Hold up the treadmill. Move the treadmill to suitable position by using the transport wheels. Put down the treadmill slowly with hands holding on the running deck. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... -
Page 9: Console Instructions
QUICK INCLINE: When the treadmill is running, you can set the inclination directly by pressing the quick incline key 4,6,8,10,12. FAN: To turn on and off the fan. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... -
Page 10: Operating Modes
6. Each time you complete a segment, the console will beep. 7. When the set time is reduced to zero, the speed slowly decrease until it stops. The display will show End with a warning sound. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... - Page 11 Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 12 5. Use SPEED +/- o INCLINE +/- keys to change the speed and the incline for the segment. 6. Press MODE to move to the next segment. 7. When all 16 segments are complete, press START to begin. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 13 However, the user can always change the speed and incline by using the keys. Computer has built-in dual-channel stereo. Use the distributive audio adapter MP3 wire to connect the MP3 input and computer music input, it will play. OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
-
Page 14: Troubleshooting
Poor connection of the seed sensor wire. Re-connect the wire of the AC motor b. AC motor does not in right connection Change the wire Damage of the connection wire OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... -
Page 15: Maintenance
1/4. If the belt is still not centred, repeat the above step until the running belt is on center. Adjust running belt leftward Adjust running belt rightward OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on... -
Page 16: Exploded Drawing
(eg away from heat sources). To do this, use 10 ml. of specific lubricant for bands BESTRIL/243 by Salter. Before greasing, unplug the power cord. Grease the top of the board. After greasing, remove any excess of lubricant from the band and from the structure. - Page 17 Allen C.K.S full thread screw Allen C.K.S half thread screw Hex self locking nut Allen socket full thread screw Flat washer Allen socket full thread screw Allen socket full thread screw OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
- Page 18 Allen socket full thread screw Screen overlay Touch button overlay Screen PCB Touch button PCB Safety key thimble Safety key iron Safety key micro switch Safety key overlay OWNER’S MANUAL V. 102014 ENGLISH PT-420 TREADMILL www.salter.es This manual is available on...
-
Page 19: Environmental Note
City Council or the retailer. 11. WARRANTY CONDITIONS Consult the warranty of this equipment on www.salter.es REF. PT- 420 TREADMILL Design and quality by SALTER Made in: CHINA Imported by: Cial. SALTER, S.A. Lluis Millet, 52 08950 Spain N.I.F.: A-08544298 OWNER’S MANUAL V.
Need help?
Do you have a question about the PT-420 and is the answer not in the manual?
Questions and answers