Yamaha MY16-CII Owner's Manual page 21

Note: In this case the MY16-CII card that is supplying the clock signal to the host device is
operating in Network Sync mode.
Conductor Priority Settings
"Conductor Priority" is a setting related to the Network Sync mode. The "Conductor Priority" filed
is located at the center of "MY16-CII Advanced Settings" window. Roll your cursor over this field
to see an edit box via which you can specify conductor priority by using the up and down buttons
on the right side of the box.
Auto:
The appropriate conductor priority will be set according to the MY16-CII clock synchronization
mode. Use this mode unless you need to set a specific device as the CobraNet conductor.
0-255:
Specifies a fixed conductor priority. A fixed conductor priority setting can be used when a specific
device is to be assigned as the CobraNet conductor.
Auto Conductor Priority Value
When the conductor priority setting is "Auto", the conductor priority is set according to the
synchronization mode, as follows.
MY16-CII Sync Mode
CobraNet Manager Lite for Yamaha Owner's Manual
MY16-CII
Clock
PM5D etc
Figure 26: Host Sync 2
Figure 27: Conductor priority edit box
Network Sync
Host Sync 1
Host Sync 2
Host Sync 2
MY16-CII
Conductor Priority
32
128
0
21