Yamaha MY16-CII Owner's Manual page 11

For yamaha my16-cii network i/o card
Hide thumbs Also See for MY16-CII:
Table of Contents

Advertisement

Bundle Numbers
Set the appropriate bundle numbers using one of the methods described below to allow transfer
of audio signals between transmitting and receiving devices.
Connecting Multiple MY16-CII Cards Only via Matrix View
This method selects the bundle numbers automatically and is only useful for setting up bundles
that will be transmitted and received between the MY16-CII cards displayed in the Matrix View.
1.
Click on the Matrix View to create a connection or "point," as described below.
When a connection is created, bundle numbers are set for the transmitting and receiving
devices, allowing audio signal transfer. "Tx" is the transmit bundle and "Rx" is the receive
bundle. The numbers following Tx or Rx are the socket numbers that indicate the order of
the transmit and receive bundles.
When a new connection point is created, unicast bundles (black lines) are specified by default.
Note: Audio signals cannot be transferred if the latencies of the transmitting and receiving
devices differ. Set the same latency for both devices via the "Yamaha Device Settings" window
(page 16).
CobraNet Manager Lite for Yamaha Owner's Manual
Figure 8: Matrix View
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cobranet manager lite

Table of Contents