Danger! sions and where there are infl ammable When using the equipment, a few safety pre- liquids, gases or dust. Electric tools produ- cautions must be observed to avoid injuries and ce sparks which could set the dust or vapours damage.
Page 17
up accidentally. Ensure that the electric using the appliance. Many accidents are tool is switched off before you connect caused by badly maintained electric tools. it to the power supply and/or insert the Keep your cutting tools sharp and clean. battery, or pick up or carry the tool.
Page 18
shoes must be worn throughout the time Take care not to touch moving hazardous parts spent using the tool. before the tool has been disconnected from the c) Avoid using the tool in bad weather mains connection and the moving hazardous conditions, particularly when there is a risk of parts have come to a complete standstill.
Page 19
• • Never use the equipment while it is raining or Read the directions with due care. Familiarize in damp or wet surroundings. yourself with the operator controls and proper • Protect your equipment against moisture and operation of the equipment. •...
• ample, do not try to cut grass growing on If the cable is damaged during operation, it walls or stones, etc. must be disconnected immediately from the • The person operating the grass trimmer is power supply. Do not use the machine if the liable for any damages sustained by third par- power cable is damaged or worn.
9. Edge guide equipment is properly used and maintained. 10. Lock for rotatable motor head Important. This equipment must not be used 11. Line spool for composting purposes (shredding) as this 12. Guard hood could result in injury or damage to property. 13.
The specifi ed vibration value can be used for initi- 5.2 Adjusting the additional handle (Fig. 4) al assessment of a harmful eff ect. Place the electric grass trimmer on a fi rm surface. Slacken the screw (Fig. 5/Item A) and move the additional handle to its optimal position.
• Replacement part number of the part required to avoid danger. For our latest prices and information please go to www.Einhell-Service.com 8. Cleaning, maintenance and Spare line spool Art. no.: 34.056.85 ordering of spare parts Danger! 9.
10. Storage Store the equipment and accessories out of children’s reach in a dark and dry place at above freezing temperature. The ideal storage tempe- rature is between 5 and 30 °C. Store the electric tool in its original packaging. 11.
Page 25
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac- companying products is permitted only with the express consent of the Einhell Germany AG. Subject to technical changes - 25 - Anl_GC_ET_4530_Set_SPK7.indb 25...
* Not necessarily included in the scope of delivery! In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com. Please ensure that you provide a precise description of the problem and answer the following questions in all cases: •...
We draw attention to the restrictions of this guarantee concerning wear parts, consumab- les and missing parts as presented in the service information included in this operating manual. Warrantor/ Service: Einhell UK Ltd, Unit 10, 1st Floor, Champion‘s Business Park, Arrowe Brook Road, Upton, Wirral, CH49 0UQ - 27 - Anl_GC_ET_4530_Set_SPK7.indb 27 Anl_GC_ET_4530_Set_SPK7.indb 27...
Need help?
Do you have a question about the GC-ET 4530 and is the answer not in the manual?
Questions and answers