Yamaha MOTIF 6 Software Manual page 10

USB MIDI Driver
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To operate the MOTIF from your computer via USB, you'll need to install the
appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and forth
between sequence software and the MOTIF via a USB cable.
Computer
Sequence
Software
USB cable
OMS
Driver
First install OMS before you install the USB-MIDI driver. Also, after installing
the driver, you will need to set up OMS (above).
1 Start the computer.
2 Insert the included CD-ROM into the CD-ROM drive. The system displays
the CD-ROM icon on the desktop.
3 Double-click the CD-ROM icon and double-click the "Install USB Driver"
icon in the "USBdrv_" folder to display the following installation screen.
4 The "Install Location" box displays the destination of the installation. If you
wish to change the destination disk or folder, use the [Switch Disk] button
and the pop-up menu to specify the desired destination.
n
This box usually displays the start-up disk as the destination.
5 Click the [Install] button. The system displays the following message: "This
installation requires your computer to restart after installing this software.
Click Continue to automatically quit all other running applications." Click
[Continue].
n
To cancel the installation, click [Cancel].
6 The installation starts. If the driver has already been installed, you will
receive the following message. To return to step 3, press [Continue]. To
complete the installation, click [Quit].
MOTIF
PAN REVERB CHORUS TEMPO
CUTOFF RESONANCE ATTACK RELEASE
KNOB ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2 REMOTE MUSIC PRODUCTION SYNTHESIZER
CONTROL FUNCTION CONTROL ON/OFF Integrated Sampling Sequencer
Modular Synthesis Plug-in System Real-time External Control Sur face
MODE SLOT 1 SLOT 2 SLOT 3
KN 1 KN 2 KN 3 KN 4 CATEGORY
MEQ LOW MEQLOWMID MEQ HI M ID MEQ HIGH EFFECT BYPASS ARPEGGIO VOICE PERFORM MASTER DRUM KITS PRE 1 PRE 2 PRE 3 GM USER PLG 1 PLG 2 PLG 3 SEARCH
MASTER INSERTION SYSTEM ON/OFF FAVORITES A. PIANO KEYBOARD ORGAN GUITAR / BASS STRINGS BRASS REED/PIPE
VOLUME VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4 SEQUENCER COMMON PLUCKED
SONG PATTERN FILE A B C D E F G H SECTION
SEQ TRANSPORT
DEC/NO INC/YES SYN LEAD SYN PAD/ SYN COMP CHROMATIC DRUM / SE MUSICAL FX COMBI
CHOIR PERCUSSION PERCUSSION TRACK
SAMPLING INTEGRATED MIXING UTILITY 1 2 3 4 5 6 7 8 SELECT
SONG SCENE SF 1 SF 2 SF 3 SF 4 SF 5 INFORMATION
LOCATE 1 2
ELEMENT/ PERF.PART / ZONE
REC
EDIT JOB STORE F1 F2 F3 F4 F5 F6 EXIT ENTER 9 10 11 12 13 14 15 16 MUTE
COMPARE SCENE STORE SET LOCATE EXECUTE SOLO
OCTAVE CS 1 CS 2 CS 3 CS 4
DOWN UP
ZONE 1 ZONE 2 ZONE 3 ZONE 4
7 When the installation is complete, the system displays the following
message: "Installation was successful. You have installed software which
requires you to restart your computer." Click [Restart]. The computer
automatically restarts. You can locate the installed files in the following
locations:
• System Folder | Control Panels | YAMAHA USB MIDI Patch
• System Folder | Extensions | USB YAMAHA MIDI Driver
• System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver
BANK
Voice Editor, File Utility, MIDI Setup
GROUP
NUMBER
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Once you've installed these software programs, you can use your computer to
edit the voices of the MOTIF as well as access and organize data stored to media
connected to the MOTIF (Memory card and SCSI devices).
1 Double-click on the "Tools" folder in the CD-ROM.
"Motif" folder and "TWE" folder will be displayed.
2 Double-click on the "Motif" folder.
"Install File Utility" and "Install Voice Editor for MOTIF6" file will be
displayed.
3 Double-click on the "Install File Utility" file.
The File Utility installation dialog will be displayed. Execute the installation
by following the on-screen directions.
4 After installing the File Utility, double-click on the "Install Voice Editor for
MOTIF6" file.
The Voice Editor installation dialog will be displayed. Execute the
installation by following the on-screen directions.
5 After installing, restart the computer.
For details, refer to the on-line Help or the PDF owner's manual.
TWE
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
With the TWE audio editing software, you can edit wave data directly on your
computer.
1 Double-click on the "TWE" folder.
Four different language folders will be displayed.
2 Select the language that you want to use and double-click on its folder.
The "YAMAHA TWE" folder will be displayed.
3 Copy the "YAMAHA TWE" folder to the hard disk of your computer.
For details on how to use TWE, refer to the on-line manual provided in the
folder.
10