Pro Tools - Yamaha MOTIF 6 Software Manual

Preference File for Logic
1 Start Logic.
2 Select Key Commands... in Settings from the Option menu.
3 Select Import Key Commands... from the Option menu in the "Key
Commands" window called up via step #2.
4 In the dialog window called up via step #3, select a preference file for Logic
named "Logic32.prf" in the included CD-ROM and click [Open].
After importing the file, the following setup appears.
Please note that the Key Command settings are replaced with the selected
preference file.
Template for SONAR/SONAR2/Cakewalk
ProAudio (Installation)
1 Copy the template file from the CD-ROM to the folder where the SONAR/
SONAR2/Cakewalk ProAudio are installed.
2 Start SONAR/SONAR2/Cakewalk ProAudio.
3 Select Option from the menu bar and select Audio. The "Direct" Show
Audio (Cakewalk Direct Show Audio)" dialog will be displayed.
4 Set the text box Number of Aux Busses to 3 (default setting is 2.) and click
[OK].
The setup for loading a template has been installed.
Template for SONAR/SONAR2/Cakewalk
ProAudio (Importing)
1 Start SONAR/SONAR2/Cakewalk ProAudio.
2 Select "Open (SONAR)/New (Cakewalk)" from the File menu.
The Open/New Project File dialog will be displayed.
3 Select the "Cakewalk Template" from the "Files of type" menu (when you
are using the SONAR), then select "Yamaha MOTIF Synthesizer" from the
dialog list and click [OK].
The template will be imported and the three windows (Track window,
Control window, and Panel window) will be displayed.
The setup has been completed and you can control SONAR/SONAR2/
Cakewalk ProAudio from the MOTIF.
n
Select "MIDI Devices..." from the Option menu to open the MIDI Ports window. From
this window, set Input Ports to "YAMAHA USB IN 0-3." If the MOTIF is connected
to the computer via MIDI, set Input Ports to 1 (for example, "IN 0-1").
When you change the track structure from the template setting...
1 Click the [CONFIG] button in the Panel window (above).
2 Set the first track number of the MIDI tracks by using the [SET MIDI First
Track] knob.
• When this template is used, the MIDI tracks should be arranged in numerical
order. Otherwise, you cannot control Cakewalk ProAudio from the MOTIF.
• If you set the first track number to an unused track number, the knobs,
buttons, and sliders on the window may be grayed out. In this case, set the
first track number to the first available track containing data.

Pro Tools

The special setup file is not necessary for using Pro Tools. You can control Pro
Tools from the MOTIF by changing settings on the Pro Tools. The method for
setting up is the same as on the Macintosh. See page 11.
Cubase VST/32 Demo version
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1 Double-click on the "Seq_Demo" folder.
The "Cubase" folder will be displayed.
2 Double-click on the "Cubase" folder.
The "Cubase_VST/32_Demo_50.exe" file will be displayed.
3 Double-click on the "Cubase_VST/32_Demo_50.exe" file.
4 Execute the installation by following the on-screen directions.
MIDI port setting
(when starting the software as
a stand-alone application)
Before setting the MIDI port on the Voice Editor or File Utility, you should set
the MIDI port from the MIDI SETUP toolbar.
n
When you start the Voice Editor or File Utility as a plug-in application in the Open Plug-in
Technology compatible application, refer to the the PDF manual for the respective
software.
1 Start the Voice Editor or File Utility.
2 Click the MIDI Setup button in the Toolbar called up via step #1.
MIDI Setup button
3 In the MIDI Setup window called up via step#2, click the [ ] button at the
right end of each box and make the port settings as shown.
n
In order for MIDI ports to be available here, you'll need to select the relevant MIDI
port within each application software (Voice Editor or File Utility). This is the port
that you'll use in the various software. For details on setting the MIDI port, refer to the
on-line manual of each software.
7