Midi Keyboard System; Midi Effector System - Yamaha MFC10 Owner's Manual

MFC10 Sample Setups
Connect the MFC10 to a MIDI keyboard (Yamaha Synthesizer VL1/VL7, W5/W7, QS300, EOS,
Portable Keyboard, Clavinova, etc.).
The currently set keyboard voices (MIDI tone generator voices) can be changed, according to
the type of Program Change data transmitted from the MFC10.
Also, control change data, etc., set in the keyboard can be controlled according to the type
Function data transmitted from the MFC10. Rhythm or song start/stop, continue, etc., can also be
controlled depending on the type of instrument.
Setting
MIDI effectors (Yamaha SPX990, etc.) connected to the MFC10 can receive MIDI program changes.
According to the Program Change data transmitted from the MFC10, set Program Change numbers
with the corresponding effect program (type) to select that effect. Of course you can select effects with
the effector itself, but using the MFC10 leaves your hands free to play yet, provides the ability to select
effects quickly and easily.
Setting
28
M I D I K e y b o a r d
MIDI OUT
STATUS BANK MSB/MAX
.
8. 8 . 8
DATA/CTRL BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM DEC ±10 INC MEMORY PC WRITE
/NO /YES EDIT EDIT /EXIT
Both the MIDI keyboard's receive channel number and the MFC10's
Program Change Memory Status (MIDI channel number) should be set to
the same MIDI channel number.
MIDI Effector
MIDI OUT
STATUS BANK MSB/MAX
.
DATA/CTRL BANK LSB/MIN 8. 8 . 8
TOGGLE ON-OFF DEC INC MEMORY PC WRITE
/NUMBER OF PGM ±10
/NO /YES EDIT EDIT /EXIT
Both the MIDI effector's receive channel number and the MFC10's Pro-
gram Change Memory Status (MIDI channel number) should be set to the
same MIDI channel number.
S y s t e m
MIDI IN
Keyboard
Yamaha VL1/VL7, W5/W7, etc.
System
MIDI IN
Effector
Yamaha SPX990, etc.