Foot Controller; Editing Fc (Foot Controller) Data - Yamaha MFC10 Owner's Manual

Foot Controller

The MFC10's onboard foot controller (1) and external foot controllers (2-5) can be inde-
pendently set to transmit MIDI data.
Select the type of data to be transmitted by each foot controller and edit those param-
eters.
Foot controllers can transmit Control Change, After Touch, and Pitch Bend data.

Editing FC (Foot Controller) data ......................................................

1
Press [FC EDIT], one of the lamps above the [1]-[5] foot
switches and the STATUS lamp will flash.
2
Press [1]-[5] to select the foot controller to be edited (the lamp
above the selected foot switch will flash).
Onboard
Foot Controller 1
3
Press [INC/YES] or [DEC/NO] to assign STATUS data
(transmit MIDI STATUS and MIDI channel number)(the lamp
will flash).
The 1's digit (MIDI channel number 1-16) of Status is shown
in hexadecimal. (see page 10)
Channel Number
d3
MIDI STATUS
22
STATUS BANK MSB/MAX
.
8 . 8 . 8
DATA/CTRL BANK LSB/MIN
TOGGLE ON-OFF
DEC INC MEMORY FC WRITE
/NUMBER OF PGM ±10
/NO /YES EDIT EDIT /EXIT
External
Foot Controller 3
External External
Foot Controller 2 Foot Controller 4
FC
EDIT
External
Foot Controller 5
DEC
/NO
STATUS
~
b0
~
d0
~
E0
STATUS BANK MSB/MAX
DATA/CTRL BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM
INC DEC INC
±10 ±10
/YES /NO /YES
bF
Transmit Control Change
dF
Transmit After Touch
EF
Transmit Pitch Bend