Initialize - Yamaha MFC10 Owner's Manual

I n i t i a l i z e
The initialize operation restores the MFC10's settings to their original factory condition.
1
Press [POWER ON/OFF] and switch off the power.
2
While holding both [MEMORY EDIT] and [FC EDIT], press
[POWER ON/OFF] to switch on power to the MFC10.
3
"FA" will appear in the LED display once the initialize
operation is completed. The MFC10 will return to normal
control status.
26
• Using the initialize operation will erase whatever
settings you have made on the MFC10. If you have
important settings you wish to keep, store them to a
MIDI data storage device with the Bulk Dump operation
(see page 25)
MEMORY
EDIT
POWER
ON/ OFF
FC
EDIT
POWER
ON/ OFF
FA