Copying Or Appending Files - Yamaha MDF3 Owner's Manual

Copying or Appending Files

The "Append" function lets you copy files, or append files to each other. If you
select two files which contain data as the source and destination files, the data from
the source file will be appended to the end of the destination file. If you select an
unused file as the destination file, the source file will be copied. (The copied file will
be given the same name as the source file.)
1. In UTILITY mode, select
"03: Append".
03:~~~~~~~Append
~å
When you press the START/STOP key,
the following display will appear in the
LCD.
Apn:M01~MDRå~M01
source file source
number file name
52
2. Select a source file.
Using the FILE DATA keys, select the file
to be copied or appended.
Apn:S01~SONG~S01
~~~~~~å
Note:
You can only copy or append files cre-
ated on the MDF3 (or the MDF2).
destination
file number
3. Move the cursor to the right.
Press the CURSOR [>>] key to move the
cursor to the destination file number.
Apn:S01~SONG~S01
~~~~~~~~~~~~~~~å