Receiving Bulk Data - Yamaha MDF3 Owner's Manual

Receiving Bulk Data

1. Check your MIDI connections.
The MIDI IN jack of the MDF3 should
be connected to the MIDI OUT jack of
the sending device.
MIDI cable
MIDI IN MIDI OUT
external MIDI device
(keyboard, sequencer, etc)
MDF3
If you have not done so already, place a
formatted disk in the MDF3 disk drive.
24
2. Enter MDR mode.
Press the MDR key. The LED above the
key will light, and the name of the cur-
rently selected MDR data file will appear
in the LCD.
01~~~MDRå01
~å
3. Select an empty file.
Using the FILE DATA keys, select the
number of the empty file where you want
to save the data. (The names of empty
files will be blank.)
02
~å
Note:
If you select a file which already con-
tains data, that data will be erased when the
incoming data is received. If you choose such
a file, make sure it does not contain data that
you want to keep.