Transmitting Bulk Data - Yamaha MDF3 Owner's Manual

Transmitting Bulk Data

1. Check your MIDI connectoins.
The MIDI OUT jack of the MDF3 should
be connected to the MIDI IN jack of the
receiving device.
MIDI cable
MIDI OUT MIDI IN
external MIDI device
(keyboard, sequencer, etc.)
MDF3
If you have not done already, place a disk
containing the bulk data in the MDF3
disk drive.
2. Enter MDR mode.
Press the MDR key. The LED above the
key will light, and the name of the cur-
rently selected MDR data file will appear
in the LCD.
01~~~MDRå01
~å
file number file name
3. Select a file to transmit.
Using the FILE DATA keys, select the file
to be transmitted.
03~Pfåsound
27