Stopping The Generator; Maintenance & Care - DUROMAX XP4400 Owner's Manual

If your generator is electric start model, once running, it will charge the battery on the
generator automatically. While charging, you can see the indication light is on, after
the battery is full, the light will turn off.

STOPPING THE GENERATOR

To stop the generator:
1. Turn off, then unplug all connected electrical devices.
2. Switch the circuit breaker to the "OFF" position.
3. Allow the generator to run for several more minutes with no electrical devices
connected. This helps stabilize the temperature of the generator.
4. Set the engine switch to the "OFF" position.
5. Turn the fuel valve to the "OFF" position.
WARNING:
Allow the generator to cool for several minutes before touching areas
that become hot during use.
CAUTION:
Allowing gas to sit in the generator tank for long periods of time without
use can make it difficult to start the generator in the future. Never store generator for
extended periods of time with fuel in the tank.
MAINTENANCE /CARE
Proper routine maintenance of your generator will help prolong the life of your machine.
Please perform maintenance checks and operations according the schedule in figure 13.
CAUTION:
Never perform maintenance operations while the generator is running.
Recommended Maintenance schedule
Check level
Engine oil
Replace
Check
Air cleaner
Clean
Clean
Fuel filter
cup
Check/clean
Spark plug
Check
Gas tank
level
Clean
Cleaning the Generator
Always try to use your generator in a cool dry place. However, in the event your generator
becomes dirty you may clean the exterior with one or more of the following:
- A damp cloth
- A soft brush
Each
use
×
×
gas
×
Figure 13- Recommended maintenance schedule
Every Every 3
month or months or
20 hrs 50 hrs
×
×
×
Every 6 Every
months or year or
100 hrs 300 hrs
×
×
×