Download  Print this page

Yamaha Magicstomp Software Installation Manual Page 3

Yamaha magicstomp guitar processors: install guide.
Hide thumbs

Advertisement

5 Check the radio button to the left of "Search for the best driver for your
device. (Recommended)." Click [Next]. The window below enables you to
select a location in which to install the driver.
6 Check the "CD-ROM drive" box and uncheck all other items. Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the USBdrv_ directory of the CD-ROM
drive (such as D:\USBdrv_\) and continue the installation.
n
When using the Windows 98, specify the USBdrv_ directory of the
CD-ROM drive (such as D:\USBdrv_\) and continue the installation.
7 When the system detects the driver on the CD-ROM and is ready for
installation, it displays the following screen.
Make sure that the "YAMAHA USB MIDI Driver" is listed, and click
[Next]. The system starts the installation.
8 When the installation is complete, the following screen appears. Click
[Finish].
n
Some computers may take about ten seconds or more to show this
screen after the installation is complete.
Windows 98
Windows Me
The driver has been installed.
SOFTWARE for MAGICSTOMP
3
Installation Guide

Advertisement

   Related Manuals for Yamaha Magicstomp

Comments to this Manuals

Symbols: 0
Latest comments: