Care And Cleaning - Wahl MANSCAPER Instructions Manual

MANSCAPER TRIMMER
TM
CARING FOR YOUR TRIMMER
OILING BLADES
For best results, use Wahl Clipper Oil on the blades only when
necessary, or approximately once a month. Motor bearings are
permanently lubricated—do not attempt to oil.
When oiling your trimmer, turn the trimmer "ON - I," hold the unit
with the blades facing DOWN and squeeze three drops across the
front of the blade and one drop on each side on the heel of the blade.
Wipe off excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will cause
damage if allowed to seep back into motor.
BLADE CARE
Trimmer blades have precision-hardened,
ground and lapped cutting teeth. Blades
should be handled carefully and never
bumped or used to cut dirty or abrasive
material. Clean with the included brush.
CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk
any loose hairs from the unit and the blades. Store unit in such
a manner so that blades are protected from damage.
15