Advertisement
CLEANING AND MAINTENANCE
CLEANING ROTARY SHAVER (ATTACHMENT HEAD ONLY)
• Regular cleaning guarantees better shaving results.
• Never clean, remove or replace attachment head assembly while motor
is on.
• Do not apply pressure to blade foils. Do not touch razor heads with hard
objects as this may dent or damage precision made slotted blade foils.
• Do not use razor if blade foils are damaged or broken.
• The rotary shaver may be opened up to discharge whiskers.
WARNING: Do not immerse razor unit in water.
• Only get the shaver lid wet and NOT the shave base. Water may get into
the base and become trapped. Only brush or blow out the base if
whiskers remain.
• The quickest and easiest way to clean the razor heads is to rinse them
after each use or at least once a week with water. Water from the tap
should be on a cold setting.
1. Always switch razor OFF, unplug and remove power cord before
cleaning.
2. Before cleaning under tap water, first remove the rotary shaver
attachment from body as described earlier.
3. Pop open top razor foil from attachment head.
4. Clean inside and outside the razor heads and chamber by running under
cold water.
5. Leave razor head assembly open to air dry before next use.
IMPORTANT: Do not wipe or dry the shaving heads with a towel or tissue.
This could damage the shaving heads.
6. If the shaving assembly comes detached from the shaver base, align
pegs from razor lid with guide holes on the shaver base attachment.
7. You may also clean the hair chamber without water by using the
supplied cleaning brush.
Lithium Ion Triple Play
9
Hide quick links:
Advertisement
