Advertisement
STEERING COLUMN AND SIDE PADS INSTALL
M8 X 55 bolt
1 ea. (A)
M8 Lock Nut
1 ea. (B)
Frame Pads
2ea. (E)
1. Lift steering column
(C) up to steering bracket
(D)
2. Attach bracket with
Bolt (A) and Lock nut (B)
A
3. Install Pads (E) on both
sides of kart.
A
B
E
D
C
B
E
7
REAR WHEEL ASSEMBLY
Hardware:
Wheel Spacers
2ea. (A)
Key
2ea. (B)
M14Washer
2ea. (C)
M14 Castle nuts 2ea. (D)
Cotter pins
2ea. (E)
1. Slide wheel spacer (A) over
axle
2. Insert Key (B) into Keyway
grove on axle.
3. Install Tires on rear
axle making sure air stem on
rim faces out.
4. Attach wheel to axle
using hardware in the
following order:
Washer (C)
Castle Nut (D)
Cotter Pin (E)
5. Tighten castle nut (D) snug.
Do not over tighten.
6. Install cotter pin (E), make
sure to bend ends over once
C
installed.
WARNING
!
Failing to install cotter pins
C
could be hazardous.
Failing to install cotter pins
D
could cause the wheel to fall
D
off resulting in an accident.
Never operate Go Kart
E
E
without cotter pins installed
A
B
D
C
E
Rear wheel
Keyway
Grove
B
A
Stem
4
Advertisement
