Emptying The Grassbasket; Maintenance - Yamato CGLM 40 BL N Instruction Manual

CGLM 40 BL N cod. 82865
NOTE: Mowing long grass to a short length all at once may cause the grass to die. The cut
grass may also block up inside of the mower body.
WARNING: to reduce a risk of accident, regularly check the grass basket for
any damage or weakened strength. Replace the grass basket if necessary.
1. Release the switch lever.
2. Remove the lock key.
3. Open the rear cover and take out the grass
basket.
4. Empty the grass basket.
► 1. Rear cover 2. Grass basket
WARNING: Always be sure that the lock key and battery cartridge are removed from
the mower before storing or carrying the mower or attempting to perform inspection
or maintenance.
WARNING: Always remove the lock key when the mower is not in use. Store the
lock key in a safe place out of reach of children.
WARNING: Wear gloves when performing inspection or maintenance.
WARNING: Always wear the safety goggles or safety glasses with side shields when performing
inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration,
deformation or cracks may result
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be
performed Authorized or Factory Service Centers.
1. Remove the lock key and battery cartridges, and then close the battery cover.
2. Put the mower on its side and clean grass clippings accumulated on the underside of
mower deck.
3. Pour water toward the bottom of the machine to which the blade is attached.
NOTICE: Do not wash the machine with high pressure water.

Emptying the grassbasket

Maintenance

Maintenance
38