Adjusting The Handle Height - Yamato CGLM 40 BL N Instruction Manual

CGLM 40 BL N cod. 82865
CAUTION: Before turning the button, hold the lower handle firmly. Otherwise, the
handle mayfall and cause an injury.
The handle height can be adjusted in two levels.
Using mulching attachment
The mulching attachment allows you to return the cut grass to the ground without gathering
the cut grass in the grass basket. When you operate the machine with the mulching
attachment, be sure to remove the grass basket.
► 1. Mowing height adjusting lever 2. Front grip
NOTE: The mowing height figures should be used
just as a guideline. Depending on the conditions of
the lawn or the ground, the actual lawn height may
become slightly different from the set height.
NOTE: Try a test mowing of grass in a less
conspicuous place to get your desired height.

Adjusting the handle height

1. Turn the handle height adjust button on both
sides clockwise or anticlockwise, the lock pin
will pop out to unlock from position (1).
2. Hold the lower handle firmly to adjust, when
The lock pin aligns with the pin hole, turn the
button on both sides clockwise or anticlockwise
again, the lock pin will insert again to lock on
position (2).
► 1. handle height adjust button 2. lower
handle 3. Lock pin 4. Pin hole
36