Adjusting The Mowing Height - Yamato CGLM 40 BL N Instruction Manual

CGLM 40 BL N cod. 82865
This mower is equipped with the interlock switch and handle switch. If you notice anything
unusual with either of these switches, stop operation immediately and have them checked by
your nearest Authorized Service Center.
1. 1. Install the battery cartridges. Insert the lock key into the interlock switch and then close
the battery cover.
2. Press down the switch button and hold it.
3. Grab the upper handle and pull the switch lever on.
4. Release the switch button as soon as the motor starts running. The mower will continue to
run until you release the switch lever.
5. Release the switch lever to stop the motor.
WARNING: Never put your hand or leg under
mowing height.
WARNING: Always make sure that the lever fits in the groove properly before
operation.
The mowing height can be adjusted in the range of between 25 mm and 75 mm in total 6
position.
Remove the lock key, and then pull the mowing height adjusting lever outward of the
mower body and move it to your desired mowing height.
► 1. Switch button 2. Upper handle 3. Switch lever

Adjusting the mowing height

► 1. Mowing height adjusting lever
Hold the front grip with one hand, and then move
the mowing height adjusting lever with the other
hand.
35
the mower body when adjusting the