Using the Drive with Notebook Computer
3
Click the "Device Driver manager" tab.
4
Click H displayed on the left of the PCMCIA socket.
e If any CardBus controllers are displayed in the PCMCIA socket, you can use the
driver with CardBus mode.
e If no any CardBus controllers are displayed in the PCMCIA socket you have to
use the driver with 16 bit mode.
A System Properties
Device Manager | Hardware Profiles | Performance |
Cj View devices by type
O) View devices by connection
m) Computer
H+) COROM
H- Disk drives
6S) Display adapters
H-E Floppy disk controllers
È- Hard disk controllers
H-
Keyboard
mm) Monitors
i
(B- 2
Mouse
ED
Network adapters
El > POMCIA socket
i
i= SY Texas Instruments PCI-1220 CardBus Controller
: i8 Texas Instruments PCI-1220 CardBus Controller
0-4 Ports (COM & LPT)
Controller(s)
The Company's name and the model name of CardBus controller are different
depending on which company's computer you are using. Anyway, you just make sure
that there is a name of the CardBus on your screen.
Note:
è Depending on your computer system, you might have to change the BIOS or
PCMCIA socket setting to CardBus mode or 16 bit mode.
Refer to your computers manual and set to CardBus mode.
uolelJ
21