Advertisement
FAILURE TO READ AND UNDERSTAND THE FOLLOWING
INSTRUCTIONS MAY CAUSE YOU UNNECESSARY
COMPLICATIONS IN THE INSTALLATION OR OPERATION OF
THIS EQUIPMENT.
More Than Air. Answers.
Online answers: www.ingersollrandproducts.com
PHONE: 1-800-526-3615
CCN: 38463311 Rev. B
PSG-7
OIL/WATER SEPARATOR
INSTALLATION, OPERATION,
MAINTENANCE MANUAL
SEPTEMBER 2009
Advertisement
Table of Contents
Related Manuals for Ingersoll-Rand PSG-7
Summary of Contents for Ingersoll-Rand PSG-7
- Page 1 PSG-7 OIL/WATER SEPARATOR INSTALLATION, OPERATION, MAINTENANCE MANUAL FAILURE TO READ AND UNDERSTAND THE FOLLOWING INSTRUCTIONS MAY CAUSE YOU UNNECESSARY COMPLICATIONS IN THE INSTALLATION OR OPERATION OF THIS EQUIPMENT. More Than Air. Answers. Online answers: www.ingersollrandproducts.com PHONE: 1-800-526-3615 CCN: 38463311 Rev. B...
- Page 2 Ingersoll Rand authorized representative. All warranty claims must be performed by an Ingersoll Rand certified technician. Failure to comply with this procedure will result in denial of warranty claim. © INGERSOLL-RAND COMPANY...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1.0 HOW IT WORKS 2.0 INSTALLATION 3.0 OPERATION INSTRUCTIONS 4.0 SERVICE 5.0 TROUBLE SHOOTING 6.0 GENERAL DATA... -
Page 4: How It Works
1.0 HOW IT WORKS 2.0 INSTALLATION The oil-contaminated water from the compressed air The separator should be placed in a leveled position. system is discharged from a condensate drain into the Remove the 3 knobs on the top of the unit and remove separator (). -
Page 5: Operation Instructions
Weekly, collect a sample of the discharge water in a NOTE: clear glass vessel and, compare it to tap water, checking The PSG-7 separator cannot be used with 00% food grade for cloudiness. lubricants and/or silicon based lubricants. Replace the adsorption module when cloudiness CCN for the PSG-7 (3845699). -
Page 6: General Data
6.0 GENERAL DATA CONDENSATE INLET FOUR (4) - 1/2" NPT FILTER ELEMENT 10.4 ADSORPTION MODULE WATER OUTLET 1/2" NPT 16.2 14.3 10.4 SERVICE DRAIN 1/4" NPT... - Page 8 Mounting Instructions for PSG-7 Using Optional Mounting Bracket Locate a mounting position that provides access to the separator. NOTE: The bracket can be mounted in either position illustrated in Figure or . Make a copy of the attached template sheet.
Need help?
Do you have a question about the PSG-7 and is the answer not in the manual?
Questions and answers