Summary of Contents for Ingersoll-Rand PolySep PS-030
Page 1
PolySep PS - 030 OIL/WATER SEPARATOR INSTALLATION, OPERATION, MAINTENANCE MANUAL AND PARTS LIST FAILURE TO READ AND UNDERSTAND THE FOLLOWING INSTRUCTIONS MAY CAUSE YOU UNNECESSARY COM- PLICATIONS IN THE INSTALLATION OR OPERATION OF THIS EQUIPMENT. More Than Air. Answers. Online answers: http://www.air.irco.com PHONE: 1-800-526-3615 : 80441397 REV.
Page 2
(at manufacturer’s option) of unaltered products returned to manufacturer within stated period. In order to process a claim, Ingersoll-Rand must get from the customer a proof of purchase (date of purchase, invoice number). In no event, shall Ingersoll-Rand be liable for business interrup- tions, loss of profits, personal injury, costs of delay or any other special, indirect, incidental, or consequential losses, cost, or damages.
1.0 HOW IT WORKS 2.0 INSTALLATION The oil-contaminated water from the compressed air The Poly-Sep™ should be placed in a leveled position. system is discharged from a condensate drain into the The Zeolite bag, which is shipped in a separate carton, PolySep™.
3.0 OPERATION INSTRUCTIONS Third, the type of compressor used can reduce the life of the carbon element. Since two stage reciprocating type compressors produce higher temperatures, the conden- Do not pour condensate, oil, or any other fluid sate is more difficult to separate than from a single stage directly into the oil/water separator.
Need help?
Do you have a question about the PolySep PS-030 and is the answer not in the manual?
Questions and answers