Function Configuration Status - Generalscan R3521 Manual

Function configuration status

function barcode
Bluetooth HID Mode
Bluetooth SPP
Mode
Status at scan time
1. The green light blinks once,
accompanied by buzzer sound
and vibrator vibration.
2. After that, the sound of
engine starting is heard within 3
seconds, and the blue light also
blinks fast within 3 seconds.
1. The green light blinks once,
accompanied by buzzer sound
and vibrator vibration.
2. After that, the sound of
engine starting is heard within 3
seconds, and the blue light also
blinks slow within 3 seconds.
Status when using
1. Connection has been completed,
the blue light of the device has turned
off, which means the connection is
successful.
2. In the Bluetooth connection state,
restart the scanner and the Bluetooth
will automatically connect back. At this
time, it can be observed that the blue
light blinks twice and then goes out,
indicating that the Bluetooth
connection is successful.
1. Please change the keyboard with
Generalscan Keyboard in this mode.
2. Connection has been completed,
the blue light of the device has turned
off, which means the connection is
successful.
Page 6 of 9
GS-TS-000002