Table of Contents
Advertisement
RS232 Mode
Step1. Connect the RS232 Cable and the Power Adapter.
Step2. Bluetooth Connection of Scanner and Cradle
Put the scanner into the cradle and wait for 3 seconds to connect,
or scanning the cradle bluetooth address barcode.
Step3. The date will be output in serial port software.
PARAMETERS
Baudrate 115200
SCANNER ALONE BLUETOOTH CONNECTION
USB HID Mode (Default)
Step1. Scan the barcode below, scanner switch to USB HID mode.
Step2. Use the terminal to search and connect the scanner, and the
Bluetooth name is the SN of the scanner and marked on the label.
When connect successfully the bluetooth LED on scanner keep
lighting, with prompt beep as well.
Step3. Open a notebook application. When you scan a barcode
the data will appear at the cursor.
BASIC SETTINGS
Data Bits 8
Bluetooth HID Mode
Scanner Factory Setting
Flow Control N
Stop Bits 1
Advertisement
Table of Contents
