C.ITOH C310 User Manual page 68

Function No. Menu No. Explanation Override command
15 01,02
When Menu No. is 01, a LF is performed upon a buffer
full condition. This prevents lines from being printed on
top of each other.
When Menu No. is 02, no LF is performed upon a buffer
full condition therefore causing one line to be printed over
the preceding line.
16 01,02 Determines whether PE detection is effective or not. PE ESC 0
detection is effective when Menu No. is 01. Printing stops ESC o
at 1 inch from the paper end.
PE detection is ineffective when Menu No: is 02.
Caution: Printing continues even if the paper becomes
empty.
18 01,02 Selects printing of the number 0 with or without a slash.
0 is selected when Menu No. is 01.
([) is selected when Menu No. is 02.
19 01-16 Selects the specified character set. The international
ESC D
character can be selected according to Menu No.
ESC Z
21 01,02 Determines which codes are assigned as printing
command.
The CR code is only used for printing function when
Menu No. is 01.
The CR, LF, VT, FF or US command is used for printing
function when Menu No. is 02.
22 01,02 Specifies the functions of CR.
When Menu No. is 01, the CR code performs the follow-
ing functions: printing command, carriage return.
When Menu No. is 02, the CR code performs the follow-
ing functions; printing command, carriage return, line feed.
23 01,02 Selects whether the CAN code is effective or not.
The CAN code is effective when Menu No. is 01.
The CAN code is ineffective when Menu No. is 02.
24 01,02
Determines whether the DC1/DC3 codes are valid or
invalid.
The DC1/DC3 codes becomes valid when Menu No. is
01.
The DC1/DC3 codes becomes invalid when Menu No. is
02.
25 01,02 Determines whether the SO/SI codes are valid or invalid.
The SO/SI codes becomes valid when Menu No. is 01.
The SO/SI codes becomes invalid when Menu No. is 02.
26 01-03 Specifies the functions of the FF!(OC)H code.
The reception of FF performs the normal TOF when Menu
No. is 01.
The reception of FF performs the same operation as LF
when Menu No. is 02.
The reception of FF is ignored when Menu No. is 03.
27 01,02 Determines the initial status of VT.
VT is set every inch when Menu No. is 01.
VT is set every line when Menu No. is 02. (VT performs
the same operation as LF.)
3-18