2.6.2.2 Insert the paper below the paper cover of the printer and move the friction release lever
to the pin feed position and adjust the right and left sprocket tractor positions for proper
paper width.
Pull the tractor set lever of the left tractor toward you. Move the tractor to the left
edge of the paper. Then push the tractor set lever back to lock the tractor.
Tractor set lever
Left tractor
Fig. 2-14
Open the paper holder. Align the left-hand side holes of the paper with the tractor
pins. Then close the paper holder.
Paper holder
Fig. 2-15
2-12