C.ITOH C310 User Manual page 102

ESC
g
(n}
Code
Hex. code
Dec. code
«Format»
ESCg
Hex. data
Dec. data
••1111•
«Sample Program»
«Printing»
Designate Dot Corresponding Graphics Mode
ESC g
(n)
(lB), (67),(nO nl n2) n0-n2=000-XXX
(27), (103), (nO nl n2) n0-n2=000-XXX
The ESC g code selects the dot corresponding graphics mode.
n0-n2 designate the number of dot columns you want to send. n0nln2 is a three
digit decimal number. For example, to set 10, nO=O, nl=l and n2=0 (30Hex
31Hex 30Hex or 48 49 48). This code designates eight dot columns as a unit.
Thus 010 means 80 dot columns.
LPRINT CHRS (&HlB); "gn0nln2"
LPRINT CHRS (27); "gn0nln2"
Designate 16 dot columns.
Print the following:
10 LPRINT CHf:;:$(27) ;"g002";
20 LPRINT CHR$(1) ;CHR$(3) ;CHR$C7) ;CHRSC&HF>;
CHRSC&HlF> ;CHRS<&H3F> ;CHRSC&H7F> ;CHRS<&HFF>;
30 LPRINT CHRS<&HFF> ;CHRS<&H7F> ;CHRSC&H3F>;
CHRS<&H1F> ;CHRSC&HF> ;CHRS<7> ;CHRS<3> ;CHRS<1>
5-14
/