Table of Contents
Advertisement
3.1 Operation Panel in Set-up Mode
The set-up mode is the method to set printer functions at power on time. The set-up mode is different
from the normal print mode, and therefore in this mode the switches and lamps have the meanings which
are completely different from those in the normal print mode.
The shaded area
on the following panel shows the function of each switch in the set-up mode.
Fig.
3-1
For the printer to enter this mode, be sure to insert the paper and reliably close to cover. If no paper is insert-
ed, the printer cannot enter the set-up mode. In such a case, the printer is placed in the normal mode.
When the set-up mode is activated, Paper Empty (no paper present) detection and Cover Open (cover open
or not reliably closed) detection become invalid. Use paper that is long enough and reliably close the cover.
The auto sheet feeder and the auto loading function cannot be used in this mode.
3-1
Advertisement
Table of Contents
