Advertisement
Load schedule
Channel
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
The site specific installation manual shall include detailed information
for properly locating the components of a system in a given space. This
information shall include, as applicable, drawings depicting examples of
correct installations, as well as examples of unacceptable installations
that may pose a risk of UV overexposure (e.g. installation at inappropriate
heights, locations or orientations, open sightlines between the radiation
source and exposed upper floors, stairs or walkways, etc.).
Only install sensors supplied with the system. Ensure that only the required
number of sensors are installed for your space. The remainder can be used
as spares.
© 2023 Signify Holding. All rights reserved. Specifications are subject to
change without notice. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability
for any action in reliance thereon is disclaimed. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips N.V. All other
trademarks are owned by Signify Holding or their respective owners.
Channel type
Phase
Refer to System Builder user guide for system setup and operation.
This Class A digital apparatus complies with Canadian ICES-003.
Warning - This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Wattage
Voltage
Breaker
www.dynalite.com
AZZ 578 1223 R01
Advertisement
