Table of Contents
Advertisement
DATE MODEL
Year Month Day
If you purchased the DATE model, read this sec-
tion. The DATE model records dates up to the
year 2049 on pictures.
Switching the Mode
Press the DATE button @ with your finger, the
mode on the LCD panel switches as shown in the
chart.
Notes:
е"---- indicates no data will be imprinted.
• "M" on the LCD panel indicates "Month".
* Use the strap clamp's protrusion.to depress the
SELECT and ADJUST buttons.
Correcting the date
1. Depress the SELECT button @ to make a dif-
ferent category of digits on the LCD panel that
you want to change blink.
2. Depress the ADJUST button Ө to change dig-
its of the specified category you chose with the
SELECT button. Digits increase by one each
time you depress the ADJUST
button 6.
Holding down the button will advance digits
continuously.
3. After the data has been adjusted, depress the
SELECT button @ each time until blinking
stops.
* Depress the SELECT button @ each time. The
bar mark (—) appears on the LCD panel, indicat-
ing that data imprinting choices are possible.
• The blinking " : " allows precise fine-tuning of the
internal clock to the beginning of a specified
minute. To do so, depress the DATE button @
until "Day-Hour-Minute" digits appear and then
depress the SELECT button Ө to make the " : "
blink. Then depress the ADJUST button Ө in
sync with a time signal.
* If you release the shutter while the blinking data
is being corrected, the data cannot be imprinted.
29
Advertisement
Table of Contents
