Table of Contents
Advertisement
5. When | 1 | appears in Ше exposure counter on
the LCD panel, the film automatically stops
winding.
Ensure that [; | apears on the LCD
panel.
6. If [ E] blinks on the LCD panel, it means that the
film is not properly loaded.
Reload the film
again.
e When the main switch is turned OFF, the num-
ber of frames or | Е| indication will remain for 5
seconds on the LCD panel.
14
Film and Film Speed Setting.
* Use a DX-coded film with ISO rating from 25 to
3200. When any of these films are loaded, the
proper film speed is automatically set for the
camera.
* Non-DX coded films cannot be used. If non DX-
coded film is used, the camera automatically set
the film speed to ISO 25.
"А film with 150400 film speed is recommended
to get less image blur and to cover more of pho-
tographic situations.
* Use high-speed films with ISO 800 or higher
mainly for shooting indoors or in dimly-lit condi-
tions.
* Use of negative color film (print film) is recom-
mended.
Advertisement
Table of Contents
