Table of Contents
Advertisement
Ky Tae T 4d
Dirt
ре
EX Sy
VM
. Place the film cartridge in the film chamber by
fitting its flat side on top of the rewind shaft first
and then top end into the camera.
. Pull the film leader out far enough from the car-
tridge to reach the take-up spool. Align the tip
of the film with the film leader end mark @.
. Close the back cover. The film automatically
advances to the first frame.
X Slack No!
Q Flat Yes!
Notes:
* Ensure the film is placed properly between the
film guides.
• If there is dirt on the film detector Ө, film cannot
be wound properly.
* Ensure the film is taut as illustrated on the illus-
tration to the left. Take up any slack in the film by
pushing it back into the cartridge.
е |f the end of the film leader is extremely bent,
straighten it or cut off the bent portion.
13
Advertisement
Table of Contents
