Table of Contents
Advertisement
1. Rewinding the film
After you have exposed the last frame of the roll,
the lens retracts and the film rewinds automatical-
ly. After rewinding, the motor stops, and [8] blinks
as
shown
to indicate
that the film has
been
rewound.
е [6] blinks for approx. 5 sec. after the whole film
roll is rewound.
* A 24-exposure roll of film takes about 20 sec-
onds to be rewound.
* The entire roll of film including the film leader is
always rewound into the cartridge to prevent any
part of the film being exposed to light.
20
2. Unloading the film
To unload
the film, open
the back
cover,
and
remove the cartridge from the chamber by pulling
the top out first.
Notes:
* Never open the back cover until the whole film
roll is rewound.
* The shutter may be released a frame or two
even after the specified number of frames have
been used up as indicated by the number of
shots shown on the film cartridge. If this occurs,
these extra frames may be lost in processing.
Advertisement
Table of Contents
