Yamaha 01V96 Installation Manual page 12

12
Chapter 2—Windows Installation
Windows Me
Start your computer and Windows, and then insert the included CD-ROM
1
into your computer's CD-ROM drive.
Turn off your Yamaha mixing console, and then use a USB cable to connect
2
its USB TO HOST port to a USB port on your computer.
3 Turn on your Yamaha mixing console.
The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and recon-
necting the USB cable. Alternatively, open the Add New Hardware control panel.
4 Select "Automatic search for a better driver (Recommended)," and then click
Next.
Windows Me should be able to locate the driver automatically, in which case you can pro-
ceed to Step 5. If the driver cannot be located, select "Specify the location of the driver
(Advanced)," click Next, specify your CD-ROM drive (e.g., D:\USBdrv_), and then con-
tinue as prompted.
The following window appears when the installation is complete.
5 Click Finish, and then restart your computer.
Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide