Table of Contents
Advertisement
If the card is unformatted or otherwise not usable by
the organ, the message "NEW" appears on the screen.
If you do not wish to continue, extract the card, and
start again with another.
(3) Press the SELECT switch
until the appropriate
block name appears in the lower right hand corner
of the display. (If the name
is already on the
display, simply proceed to the next step.)
@ WARNING
If the block name on the card differs from the one you
have selected, the save operation will erase all pre-
vious data.
47
al
'
(4) Use the arrow keys to specify the index number,
the number in the upper right hand corner of the
display. (See accompanying chart for ranges avail-
able.)
Index number
32k card
16k card
ALL
1
t*
REG
1-30
1-15
RHY
1-2
1
SEQ
1-6
1-3
Note: Saving All Data
A 16-kilobyte card does not have enough room for all
data, so the organ omits the data for PROGRAM
RHYTHM H. These is no such space problem for 32-
kilobyte cards.
(5) Press the WRITE switch in the registration
memory section to start the save operation.
(6) Wait for the organ to give a short beep, for the
message "OK" to appear on the display and for the
LED in the SAVE switch to go out, signaling the
successful completion of the operation.
Note:
If the card's write protect switch
is on, the save
operation will fail and the word "ERR" appears for a
few seconds. Change the switch setting (p.50) and
start again.
@ Index Numbers
Since an IC card can hold multiple sets of data, each
one needs a reference number so that the organ can
find the data for reloading. Storing a second block of
data over a block with the same type and index number
automatically destroys the original version. We re-
commend that you keep careful records of card con-
tents so as to avoid the loss of your valuable data.
Advertisement
Table of Contents
