Kawai SR5 Owner's Manual page 49

@ Append — Adding to the End
Note:
it is impossible to add or delete material in the middle
of a sequence. Such changes are only possible at the
end.
@ Procedure
(1) Use the CHORD and REGIST switches to specify
what you wish to edit: chords, registrations, or
both.
(2) Press the RECORD switch.
(3) Use the right arrow switch to advance to the bar
after what is currently the last bar.
EIA
(4) Add new entries in the normal fashion.
(5) Press the END key to terminate the sequence.
@ Truncate — Shortening the Sequence
Note:
It is impossible to add or delete material in the middle
of a sequence. Such changes are only possible at the
end.
® Procedure
(1) Use the CHORD and REGIST switches to specify
what you wish to edit: chords, registrations, or
both.
(2) Press the RECORD switch.
(3) Use the right arrow switch to advance to the first
undesired bar.
al
(4) Press the END switch to erase that and all sub-
sequent bars.
A) ad
PROGRAM
a=
45
@ Erase — Delete the Entire Sequence
(1) Use the CHORD and REGIST switches to specify
what you wish to edit: chords, registrations, or both.
(2) Press the RECORD switch.
(3) Press the END switch to erase the data for all bars.