Casio 3545 Operation Manual page 9

4.
Press (C).
5.
Use (D) to change the summer time
setting.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Setting the Time/Date
●
Important!
Configure the Home City setting before
●
changing the current time and date
settings.
Setting a Home City
l
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the city code
starts to flash.
City code
Watch Operation Guide 3545
3.
Use (C) to display the setting you want to
change.
Each press of (C) cycles through
●
settings in the sequence shown below.
Home City
Summer time
12/24-hour timekeeping
Seconds
Hours
Minutes
Year
Month
Day
Operation tone enable/disable
Illumination duration
Power Saving
4.
Configure the date and time settings.
While the seconds are flashing,
●
pressing (D) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
9