System Recovery; Creating Recovery Discs; Choosing Recovery Discs - HP Pro ms218 Maintenance And Service Manual

Table of Contents

Advertisement

6

System Recovery

System recovery completely erases and reformats the hard disk drive, deleting all data files you have
created. System recovery reinstalls the operating system, programs, and drivers. However, you must
reinstall any software that was not installed on the computer at the factory. This includes software that
came on CDs included in the computer accessory box, and software programs installed after
purchase.
Choose from the following methods for performing a System Recovery:
Recovery Image—Run the system recovery from a recovery image stored on your hard disk drive.
The recovery image is a file that contains a copy of the original factory-shipped software. To perform
a system recovery from the recovery image on your hard disk drive.
NOTE:
storage.
Recovery Discs—Run the system recovery from a set of recovery discs that you create from files
stored on your hard disk drive.

Creating Recovery Discs

Complete the procedure described in this section to create a set of recovery discs from the recovery
image stored on your hard disk drive. This image contains the operating system and software
program files that were originally installed on your computer at the factory.
You can create only one set of recovery discs for your computer. Furthermore, the recovery discs you
create can be used only with your computer.

Choosing Recovery Discs

To create recovery discs, your computer must have a DVD writer.
Use high-quality discs to create your set of recovery discs. The verification standard for the recovery
disc creation process is very high. You may see error messages such as Recording failure when
writing disc or Error detected during disc verification.
Your discs may be rejected if they are not defect-free. You will be prompted to insert a new blank disc
to try again. It is normal that some of your discs may be rejected.
48
Chapter 6 System Recovery
Downloaded from
www.Manualslib.com
The recovery image uses a portion of the hard disk drive that cannot be used for data
Use DVD+R or DVD-R blank media to create your system recovery discs.
You cannot use DVD+RW, DVD-RW, DVD+RW DL, DVD-RW DL, DVD+R DL, or DVD-R DL
discs to create recovery discs.
manuals search engine

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro ms219

Table of Contents