Table of Contents
Advertisement
Agitator handle not turning
Don't forcefully turn the handle! Check that nothing is under the solids bin to misalign the
agitator in the bin and the drive sham. Try to rotate the handle in the opposite direc\on to free it.
Check if blocks of unhydrated coco coir are blocking it. Ensure that the coco coir is fully hydrated
by adding addi\onal water.
Ensure nothing is wrapped around the agitator—if so empty the solids bin and untangle it.
The Solids bin moves when I turn the handle.
Check that there are no small parts or coco coir under the solids bin.
Check that there is nothing stuck between the interface between the solids bin and the drive
sham.
The liquid light is always on and won't turn off.
Check that the circuit board isn't damaged. If the circuit board is damaged, disconnect the power
and contact us for a replacement circuit board.
Ensure there is no water or moisture on the circuit board. If drying the circuit board resolves the
problem, the waterproof coa\ng has failed and the board needs to be replaced. Contact us for a
replacement circuit board.
Try reversing the polarity of the 12V power supply. If this resolves the issue with the LED but
disables the fan, contact us for a replacement cable.
The LED liquid indicator light isn't turning on.
First check that power is being supplied to the indicator light circuit:
If the LED is powered by 9V bagery, check that the bagery is not dead.
If the LED is powered by 12V (op\onal setup), check that 12V power is being supplied—if the fan
is connected it should be running. If that doesn't work, try supplying power with a 9V bagery.
Test it by pinching the spring contacts together. If this resolves the issue, contact us for a
replacement 12V power lead.
Compo Closet 12.2023
27
Advertisement
Table of Contents
