Table of Contents
Advertisement
OpGonal installaGon: Securing CUDDY or CUDDY Lite in place
CUDDY can be easily secured in place for bumpy roads, choppy seas, or very rough nights.
Unlike some other compos\ng toilets, CUDDY can be secured flush against a wall while allowing
access to the solids bin and liquids bogle. No disassembly is required.
Tools you'll need:
Drill
4mm or 5/32 drill bit
Pencil
Screwdriver
Addi\onal Materials (not included):
Appropriate fixings for the surface you're securing CUDDY to (i.e. screws or rivets, etc.)
Steps:
1. Disconnect CUDDY from power source
2. Remove CUDDY's Solids bin and liquid bogle.
3. Lim CUDDY's seat and carefully lay the unit on its side.
4. Drill through the four eyelets in the base.
5. Place CUDDY upright and in the desired posi\on. Mark the floor with a pencil through the
holes in the base.
6. Drill pilot holes in the floor where marked and secure fixings if required.
7. Place screws through the eyelets in the base and into the floor.
8. Re-connect the power supply.
Compo Closet 12.2023
18
Advertisement
Table of Contents
